CE Marking

Construction Products Regulation

Construction Products Regulation (305/2011)

Our scope under System 1/1+ and System 2+

APPLICATION for System 1/1+ and System 2+

The application requires submission of the below mentioned documents to Turkish Standards Institution Directorate of Directives.

 

APPLICATION DOCUMENTS for System 1/1+ and System 2+

1.  Conformity Assesment Application Form

and Agreement (must be filled 2 copies)

2.  Construction Products Directive Information Form

3.  Legal document demonstrating the legal status, authorized representatives and title of the applicant such as trade registry gazette or equivalent

4.  Notary certified list of authorized signatories of the applicant

5. Contract with the subcontractor(s) if the applicant and the manufacturer are different entities (or id any other component of the factory production control process is subcontracted)

6. Payment slip for the advance amount (3000 USD)

7. Factory Production Control System documentation dossier (quality manual, organization chart, responsibilities, procedures, quality control plan, calibration status of on-site testing equipment, testing instructions, master documentation index etc.)

8. Declaration of product performances (as per annex of 305/2011/EU Construction Products Regulation), initial type tests supporting the declared performances and example records of on-site periodic tests performed,

 

Upon review of the application file, a preliminary inspection report is prepared and in case of any missing information or document, the applicant is informed accordingly to supplement the file before a given deadline. If the application file is deemed to be complete, schedule for initial inspection of the production site and the factory production control system is agreed upon with the applicant.

Once factory production control system (and the product as well in case of System 1+) is identified to be in conformity, the factory production control system is certified, thereby completing the initial certification process. In case of any non-conformities during the initial site inspection, the applicant is informed by report and asked to take necessary corrective actions before a set deadline.

Factories are obliged to inform Turkish Standards Institution as to any significant changes to the product and the system prior to certification process or afterwards via the Technical File Amendment Form. Revision requests to the certification scope shall also be submitted via the said form.

Applicants wishing to apply for TS EN ISO 9001 Quality Management System Certificate may do so by filling out the application form at "www.tse.org.tr".

Please do not hesitate to contact us for any question or certification fees

Service Program

 

Product family, product/Intended use

Technical specification

AVCP system

Aggregates and fillers for concrete, mortar and grout (in buildings, roads and other civil engineering work)

Aggregates unbound and hydraulically bound mixtures (for roads and other civil engineering works)

Aggregates for bituminous mixtures and surface treatments (for roads and other civil engineering works).

EN 12620
EN 13055-1
EN 13139

EN 13242

EN 13043
EN 13055-2

System 2+

Railway ballast (for railway works)

EN 13450

System 2+

Armourstones (for hydraulic structures and other civil engineering works).

EN 13383-1

System 2+

Common cements, including: -Portland cement, -Portland

composite cements: Portland-slag cement, Portland-silica

fume cement, Portland-pozzolanic cement, Portland-fly ash cement, Portland-burnt shale cement, Portland-limestone cement, Portland composite cement, -Blast furnace cements,-Pozzolanic cements, -Composite cements (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products)

EN 197-1

System 1+

Building limes, including: -Calcium limes, -Dolomitic limes,

-Hydraulic limes (preparation of concrete, mortar, grout and other mixes for construction and for the manufacture of construction products).

EN 459-1

System 2+

Masonry units category I (in walls, columns and partitions)

EN 771-1

EN 771-2

EN 771-3

EN 771-4

EN 771-5

EN 771-6

System 2+

Admixtures (for concrete, mortar and grout) 

EN 934-2  
EN 934-3 
EN 934-4

EN 934-5

System 2+

Bituminous mixtures (for road construction and surface treatment of roads)

EN 13108-1

EN 13108-2

EN 13108-3

EN 13108-4

EN 13108-5

EN 13108-6

EN 13108-7

System 2+

Bitumen (for road construction and surface treatment of roads)

EN 12591
EN 13808
EN 15322

EN 14023

EN 13924

System 2+

Surface treatments (for surface treatments of roads)

EN 12273

EN 12271

System 2+

Bridge deck waterproofing products and kits (for bridge decks).

EN 14695

System 2+

Membranes;

Roof sheets (in buildings)

Damp proofing sheets (in buildings)

EN 13707

EN 13969

EN 13956

EN 13967

 

System 2+

Concrete protection and repair products (for other uses in buildings and civil engineering works)

EN 1504-2

EN 1504-3

EN 1504-4

EN 1504-5

EN 1504-6

EN 1504-7

System 2+

Factory-made, designed masonry mortars (in walls, columns and partitions)

EN 998-2

System 2+

Prefabricated chimneys (storey-height elements), flue liners (elements or blocks), multi-shell chimney (elements or blocks), single walled chimneys and attached chimneys (chimneys).

EN 1856-1 
EN 1856-2  
EN 1857
EN 1858
EN 12446
EN 13063-1
EN 13063-2
EN 13063-3
EN 13069
EN 13084-5 
EN 13084-7 
EN 14471
EN 1457-1

EN 1457-2  
EN 14989-1
EN 14989-2
EN 1806

System 2+

Unfaced overlaid and veneered or coated wood-based panels (for structural elements in internal or external applications)

EN 13986

System 2+

Structural metallic products and ancillaries (1/4) : - Structural metallic sections/profiles: hot rolled, cold formed or otherwise produced sections/profiles with various shapes (T, L, H, U, Z, I, channels, angle, hollow, tubes), flat products (plate, sheet, strip), bars, castings, forgings made of various metallic materials, unprotected or protected against corrosion by coating (to be used in metal structures or in composite metal and concrete structures)

EN 10025-1
EN 10210-1
EN 10219-1
EN 15088

EN 10340

EN 15048-1

EN 10343

EN 10088-4

EN 10088-5

System 2+

Structural metallic products and ancillaries (2/4) : - Structural metallic construction members: finished metallic products such as trusses, girders, columns, stairs, ground piles, bearing piles and sheet piling, cut to size sections designed for certain applications, and rails and sleepers. They can be unprotected or protected against corrosion by coating, welded or not. (for uses in work's frames and foundations).

EN 1090-1

System 2+

Welding materials (for uses in structural metallic works)

EN 13479

System 2+

Structural connectors: metallic rivets, bolts (nuts and washers) and H.R. bolts (high strength friction grip bolts), studs, screws, railway fasteners (for uses in structural metallic works).

EN 14399-1

System 2+

Precast normal/lightweight/autoclaved aerated concrete products (1/1) : - Precast normal/lightweight/autoclaved aerated concrete products (for structural use)

EN 1168
EN 12737
EN 12794 
EN 12843
EN 13224
EN 13225
EN 13693 
EN 13747
EN 13978-1
EN 14843
EN 14844
EN 14991
EN 14992
EN 15037-1

EN 15037-2

EN 15037-3

EN 15037-4
EN 15050
EN 1520 
EN 15258

System 2+

 

Power, control and communication cables (1/3) for uses subject to regulations on reaction to fire

EN 50575

System 1+

Doors, windows, shutters, blinds, gates and related building hardware (1/1) :

 Windows (with or without related hardware) (fire/smoke compartmentation and on escape routes), Doors and gates (with or without related hardware) (fire/smoke compartmentation and on escape routes)

EN 16034

EN 14351-1+A2

System 1

Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) :

- Valves and taps (in installations in areas subject to reaction to fire regulations, used for the transport/distribution/ storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

EN 331
EN 15069

System 1

Pipes, tanks and ancillaries not in contact with water intended for human consumption (4/5) :

-Pipes (in installations in areas subject to reaction to fire regulations, used for the transport/ distribution/storage of gas/fuel intended for the supply of building heating/cooling systems, from the external storage reservoir or the last pressure reduction unit of the network to the inlet of the heating/cooling systems of the building).

EN 14800

System 1

Circulation fixtures (1/2) :
• Road traffic signs and traffic control devices installed permanently for vehicular and pedestrian uses: traffic lights and fixed danger lamps (for circulation areas)
EN 12368 System 1
Thermal insulating products (2/2) :
• Thermal insulating products (factory-made products and products intended to be formed in-situ) (for uses subject to regulations on reaction to fire)

EN 13162+A1
EN 13163+A1+A2
EN 13164+A1
EN 13165+A1
EN 13166+A1+A2
EN 13167+A1
EN 13168+A1
EN 13169+A1
EN 13170+A1
EN 13171+A1
EN 14063-1+/AC
EN 14064-1
EN 14303+A1
EN 14304+A1
EN 14305 +A1
EN 14306 +A1
EN 14307+A1
EN 14308 +A1
EN 14309+A1
EN 14313 +A1
EN 14314+A1
EN 14315-1
EN 14318-1

EN 14319-1
EN 14320-1
EN 14933
EN 14934
EN 15732
EN 15501
EN 16069+A1

System 1

Roof coverings, rooflights, roof windows and ancillary products (2/6) :
• Factory-bonded composite or sandwich panels (for uses subject to reaction to fire regulations)

Internal and external wall and ceiling finishes (3/5) :
• Panels (as internal or external finishes in walls or ceilings subject to reaction to fire regulations)
EN 14509 System 1

 

APPLICATION for System 1/1+ and System 2+

The application requires submission of the below mentioned documents to Turkish Standards Institution Directorate of Directives.

 

APPLICATION DOCUMENTS for System 1/1+ and System 2+

1.  Conformity Assessment Application Form

2.  Construction Products Directive Information Form

3.  Legal document demonstrating the legal status, authorized representatives and title of the applicant such as trade registry gazette or equivalent

4.  Notary certified list of authorized signatories of the applicant

5. Contract with the subcontractor(s) if the applicant and the manufacturer are different entities (or id any other component of the factory production control process is subcontracted)

6. Payment slip for the advance amount (10.000,00 TRY)

7. Factory Production Control System documentation dossier (quality manual, organization chart, responsibilities, procedures, quality control plan, calibration status of on-site testing equipment, testing instructions, master documentation index etc.)

8. Declaration of product performances (as per annex of 305/2011/EU Construction Products Regulation), initial type tests supporting the declared performances and example records of on-site periodic tests performed,

 

Upon review of the application file, a preliminary inspection report is prepared and in case of any missing information or document, the applicant is informed accordingly to supplement the file before a given deadline. If the application file is deemed to be complete, schedule for initial inspection of the production site and the factory production control system is agreed upon with the applicant.

Once factory production control system (and the product as well in case of System 1+) is identified to be in conformity, the factory production control system is certified, thereby completing the initial certification process. In case of any non-conformities during the initial site inspection, the applicant is informed by report and asked to take necessary corrective actions before a set deadline.

Factories are obliged to inform Turkish Standards Institution as to any significant changes to the product and the system prior to certification process or afterwards via the Technical File Amendment Form. Revision requests to the certification scope shall also be submitted via the said form.

Applicants wishing to apply for TS EN ISO 9001 Quality Management System Certificate may do so by filling out the application form at "www.tse.org.tr".

Please do not hesitate to contact us for any question or certification fees

 

SYSTEM 3- Notified testing Laboratory

Application documents, fees, related laboratory departments and contact person for applications under System 3 can be accessed at:

/IcerikDetay?ID=676&ParentID=751

 

Complete service scope (including System 3) of TSE under 305/2011/EU Construction Products Regulation can be accessed at:

http://ec.europa.eu/enterprise/newapproach/nando/index.cfm?fuseaction=notification.pdf&dir_id=33&ntf_id=258849

 

Please communicate with us for your questions and our fees.

Directorate of Directives- Expert for Construction Products

GÜL YİĞİTSOY

Tel: 0 312 416 65 49
Fax:0 312 416 62 82
gyigitsoy@tse.org.tr

Return to Old Site